Please Note: Images are for representation purposes only.

Crysta-Apex C Coordinate Measuring Machine

A Mitutoyo Coordinate Measuring Machine designed and constructed using all Mitutoyo’s experience in CNC CMM technology, this machine is built using lightweight materials and an innovative moving-bridge type machine structure, providing high motion stability, high accuracy, and affordability. The temperature correction function (16°C to 26°C) can yield accurate measurements even on the shop floor. In addition to point-to-point measurement, the MPP-310Q and Metris Laser probes provide a contact/non-contact scanning function.

Be the first to review this product

  • SKU 191-C2030
  • Model CRYSTA-Apex C203016
  • Models available C163012, C163016, C164012, C164016, C165012, C1655016, C203016, C203020, C204016, C204020, C205016, C205020
  • Range ( X,Y,Z) 905 x 1005 x 605mm
  • Resolution 0.1µm
  • Accuracy (1.7+3L/1000)µm*
  • Length standard High accuracy linear encoder
  • Max. drive speed 519mm/sec
  • Max. response speed 2309mm/sec
  • Table material Granite
  • Guide system Air bearing
  • Table size 880 x 1720mm
  • Tapped inserts M8 x 1.25mm
  • Workpiece Max. height 800mm
  • Workpiece Max. loading 1200kg
  • Air pressure 0.4MPa
  • Air consumption 60L/min
  • Mass 2231kg
  • Relocation sensor A start-up system (relocation detection sensor) is an integral security feature of this machine and will temporarily disable its operation if subject to relocation or strong vibration.
  • Remarks * L = measured length (mm)

The CRYSTA-Apex C is available in 12 models

Model No. X Range Y Range Z Range Work Table Size Accuracy
Crysta-Apex C163012 1605mm 3005mm 1205mm 1800 x 4205mm (4.5+6.5L/1000)µm
Crysta-Apex C163016
1605mm 3005mm 1605mm 1800 x 4205mm
(4.5+6.5L/1000)µm
Crysta-Apex C164012
1605mm 4005mm 1205mm 1800 x 5205mm
(4.5+6.5L/1000)µm
Crysta-Apex C164016
1605mm 4005mm 1605mm 1800 x 5205mm
(4.5+6.5L/1000)µm
Crysta-Apex C165012
1605mm 5005mm 1205mm 1800 x 6205mm
(4.5+6.5L/1000)µm
Crysta-Apex C165016
1605mm 5005mm 1605mm 1800 x 6205mm
(4.5+6.5L/1000)µm
Crysta-Apex C203016
2005mm 3005mm 1605mm 2200 x 4205mm
(6+10L/1000)µm
Crysta-Apex C203020
2005mm 3005mm 2005mm 2200 x 4205mm
(6+10L/1000)µm
Crysta-Apex C204016
2005mm 4005mm 1605mm 2200 x 5205mm
(6+10L/1000)µm
Crysta-Apex C204020
2005mm 4005mm 2005mm 2200 x 5205mm
(6+10L/1000)µm
Crysta-Apex C205016 2005mm
5005mm 1605mm 2200 x 6205mm
(6+10L/1000)µm
Crysta-Apex C205020 2005mm
5005mm 2005mm 2200 x 6205mm
(6+10L/1000)µm

 

High Accuracy in the 1.7µm class

The CRYSTA-Apex C is a high-accuracy CNC coordinate measuring machine that guarantees a maximum permissible error of MPEE = (1.7+3L/1000) μm [500/700/900 Series]. Let's compare the CRYSTA-Apex C with CMMs offering MPEE of approximately (2.5+4L/1000) μm. If, for example, the required tolerance on a dimension is ±0.02 mm, then the measuring machine uncertainty should be no more than one-fifth (ideally one-tenth) of that, i.e. 4μm. This means that with a general-purpose CMM, when the measured length exceeds 14.8"(375mm), machine uncertainty exceeds one-fifth of the dimension tolerance in this case. In contrast, as shown in the figure on the right, with the CRYSTA-Apex C the measurement uncertainty remains within one-fifth of the dimension tolerance up to 30.2"(766mm). The higher accuracy specification of the CRYSTA-Apex C therefore gives it more than double the effective measuring range in terms of accuracy-guarantee capability in this case.

Temperature Compensation System

The CRYSTA-Apex C comes equipped with a temperature compensation system that guarantees the accuracy of measurement under temperature conditions of 16 to 26 °C. This system, based on permanently installed temperature sensors on each scale working together with sensors placed on the workpiece, monitors scale and workpiece temperatures and, monitors the temperature and, before outputting the measurement result to the controller, corrects it to the value that would be measured at 20 °C, taking into account the workpiece material expansion coefficient as well as the CMM's characteristics. The combined scale/ workpiece temperature compensation scheme used on the CRYSTA-Apex C gives markedly superior results compared to systems that only compensate for scale temperature.

There are currently no reviews for this product.

Be the first to review this product

General Orders (Not Purchased Online).

If you have bought a Mitutoyo product where the order is not placed online please refer to the terms and conditions relating specifically to that order. The following terms and conditions only apply to online orders of small tools.

Delivery (Online Orders)

Standard (Next Working Day before 5pm) delivery is FREE on all orders over £150. Further express delivery options are available to suit the urgency of your requirements. Simply select the delivery service in the shopping basket. To qualify orders must be placed before 2pm. For the Highlands and Northern Ireland please call us to check

  • Next Working Day: £5.00
  • Next Working Day Before 12.00pm: £15.00
  • Next Working Day Before 10.30am: £19.00
  • Next Working Day Before 9.00am: £25.00
  • Saturday morning: £26.00

(All prices stated above exclude VAT)

 

Backorders (Online Orders)

Distributors may place backorders for products. Delivery times are subject to change without notice and should be treated as a guide only. If you have any questions regarding products that are not 'in stock' please call our Sales Team on 01264 353123 for more information and advice.

Returns (Online Orders)

In accordance with Mitutoyo customer support services and The Consumer Contracts Regulations 2013 No. 3134, if you should not be satisfied with your purchase within 14 days of receipt, you can return the item for an exchange or refund. The item returned should be in an unmarked ‘as new’ condition, including that of the original ‘product’ presentation/storage packaging or the item will be deemed as being of diminished value and this will be reflected in the. Please ensure that the return carriage packaging provides adequate protection of the item whilst in transit as any damage caused may prevent a refund.

Online returns are only accepted for items purchased directly from Mitutoyo.co.uk. If you have purchased a Mitutoyo product from one of our Distributors, please contact them directly to arrange an exchange or refund.

Refunds for returns will include the ‘Standard Next Working Day’ delivery cost if this was incurred upon supply but will not include additional costs for express delivery options.

All deliveries require a signature on receipt. Mitutoyo cannot be held responsible for items lost or damaged whilst in transit.

Sign up for all the Latest News, Events and Special offers